MODEL |
MDG - 1 |
MDG - 2 |
MDG - 3 |
CAPACITY |
|
|
|
* Height of Centre |
205 mm |
205 mm |
205 mm |
* Swing over Cross Slide |
240 mm |
240 mm |
240 mm |
* Swing over Bed |
410 mm |
410 mm |
410 mm |
* Admit Between Centre |
500 mm |
850 mm |
1000 mm |
* Swing in Gap |
660 mm |
660 mm |
660 mm |
* Bed Type |
2 V & 2 Flat |
2 V & 2 Flat |
2 V & 2 Flat |
* Width of Bed |
280 mm |
280 mm |
280 mm |
* Length of Bed |
1370 mm |
1660 mm |
1800 mm |
HEAD STOCK |
|
|
|
* Hole through Spindle |
40 mm |
40 mm |
40 mm |
* Taper in Spindle |
MT-5 |
MT-5 |
MT-5 |
* Spindle Nose type |
A24 |
A24 |
A24 |
* Spindle Speed : Steps, Range; Std. |
8, 50 to 1200 rpm |
8, 50 to 1200 rpm |
8, 50 to 1200 rpm |
Optional |
8, 70 to 1600 rpm |
8, 70 to 1600 rpm |
8, 70 to 1600 rpm |
TAIL STOCK |
|
|
|
* Taper in Quill |
MT-4 |
MT-4 |
MT-4 |
* Quill Travel |
150 mm |
150 mm |
150 mm |
* Quill Dia. |
50 mm |
50 mm |
50 mm |
SLIDE TRAVEL |
|
|
|
* Top Slide travel |
115 mm |
115 mm |
115 mm |
* Cross Slide travel |
205 mm |
205 mm |
205 mm |
* Tool shank Cross section |
20x20 mm |
20x20 mm |
20x20 mm |
FEED RANGE |
|
|
|
* Longitudinal feed per revolution |
0.05 to 0.8 mm/rev. |
0.05 to 0.8 mm/rev. |
0.05 to 0.8 mm/rev. |
* Transverse feed per revolution |
0.03 to 0.48 mm/rev. |
0.03 to 0.48 mm/rev. |
0.03 to 0.48 mm/rev. |
THREADS : No. of Steps, Range |
|
|
|
* Metric |
20, 0.5 to 7.5 mm |
20, 0.5 to 7.5 mm |
20, 0.5 to 7.5 mm |
* Inches |
36, 4 to 60 TPI |
36, 4 to 60 TPI |
36, 4 to 60 TPI |
LEAD SCREW |
|
|
|
* Diameter |
32 mm |
32 mm |
32 mm |
* Pitch |
4 TPI |
4 TPI |
4 TPI |
ELECTRICALS |
|
|
|
* Main Motor |
2 HP (1.5 KW) |
2 HP (1.5 KW) |
2 HP (1.5 KW) |
* Power Supply |
415V, 3 ph, 50 cycles A/C. |
415V, 3 ph, 50 cycles A/C. |
415V, 3 ph, 50 cycles A/C. |
WEIGHT & DIMENSIONS |
|
|
|
* Net Weight of Machine (App.) |
695 Kgs. |
775 Kgs. |
895 Kgs. |
* Wooden Case Dim. (App.) |
1675 x 900 x 1375 mm |
2100 x 900 x 1375 mm |
2250 x 900 x 1375 mm |
* Gross Weight (App.) |
950 Kgs. |
1075 Kgs. |
1250 Kgs. |
* All dimensions are in mm & approximate only.
SPECIAL FEATURES:
- Hardened & profile ground Gears & Spline shafts for long-life & noise-less operation.
- Easy Speed selection & Gear changing.
- Full Norton Gear box enabling to cut multiple threads.
- Induction hardened A24 type Spindle with proven make Taper Roller Bearings.
- Box type cross section ribbed 280 mm wide Bed providing max. torsional stiffness & rigidity.
- Independent Feed shaft minimizing wear & tear of lead-screw.
- Electromagnetic Brake with foot pedal (optional).
- Readily available & completely interchangeable spare-parts.
STANDARD ACCESSORIES:
- Flame hardened Bed
- Norton Gear Box
- Electricals
- Chuck Back plate
- Spindle Sleeve
- Dead Centres
- Tool post Key
- Oil Can
- Set of Spanners & Allen keys
- Spare parts / Instruction Manual
OPTIONAL ACCESSORIES:
- True Chuck / Dog Chuck
- Face Plate
- Steady Rest
- Follow Rest
- Rear Tool post
- Coolant pump with tank & adj. Nozzle
- D1-4 Camlock Spindle in lieu of Std. Spindle
- Chuck Plate, for (a) A24 Spindle (b) D1-4 Camlock Spindle
- Taper Turning Attachment
- Quick Change Tool post
- Key - way Milling Attachment
- Splash Guard
- Machine Lamp
- Revolving Centre - MT 4
- 3 - Position Carriage Stop
- Electromagnetic Brake with Foot Pedal
- Turcite-B Coating for Guide ways
NOTE:- Illustrations and Specifications are not binding in detail and are subject to modification and improvement without notice. |
................................................................................................................................................................................ |
